How to Fix Hunter Boots Crack Repair?

Spread the love

If you’re an outdoor enthusiast or just a fashion-forward individual, you likely appreciate the durability and style that Hunter boots bring to the table. However, even the sturdiest footwear can succumb to wear and tear over time. If you find yourself facing the unfortunate predicament of cracked Hunter boots, fear not – we’ve got your back with a comprehensive guide on how to fix Hunter Boots crack repair.

Things or Materials You’ll Need

Before diving into the repair process, gather the following materials to ensure a smooth and effective fix:


  1. Hunter boot repair kit (available online or at authorized retailers)
  2. Rubbing alcohol
  3. Clean cloth or sponge
  4. Sandpaper (fine grit)
  5. Waterproof adhesive
  6. Clear nail polish
  7. Hairdryer

How to Fix Hunter Boots Crack Repair(Steps by Steps)

Fix Hunter Boots Crack Repair

Step 1: Clean the Boots

Start by wiping the boots with rubbing alcohol and a clean cloth or sponge. This will remove any dirt or debris, ensuring a better adhesion for the repair materials.

Step 2: Sand the Cracks

Gently sand the cracked areas using fine-grit sandpaper. This helps create a smooth surface for the adhesive to bond effectively.

Step 3: Apply Waterproof Adhesive

Use the Hunter boot repair kit or a high-quality waterproof adhesive to fill in the cracks. Ensure even application, covering the entire damaged area. Follow the product instructions for the best results.

Step 4: Let it Dry

Allow the adhesive to dry completely. This might take a few hours, so be patient and resist the temptation to rush the process.

Step 5: Seal with Clear Nail Polish

Once the adhesive is dry, apply a layer of clear nail polish over the repaired area. This not only adds an extra layer of protection but also helps maintain the boots’ aesthetic appeal.

Step 6: Heat Set with a Hairdryer

To enhance the bond and durability of the repair, use a hairdryer to heat set the adhesive and nail polish. Hold the hairdryer at a safe distance and move it back and forth until the repaired section feels secure.

Step 7: Test for Waterproofing

Before venturing out into the elements, conduct a waterproofing test. Pour a small amount of water onto the repaired area and check for any signs of leakage. If the water beads up and rolls off, your Hunter boots are ready to take on the great outdoors once again.

Read More: How to Tighten Hunter Boots?

Seven Reasons That Cause Cracked Hunter Boots

Understanding the root causes of cracked Hunter boots can help you prevent future issues. Here are seven common reasons behind boot cracks:

  • Excessive Wear and Tear
  • Extreme Temperatures
  • Incorrect Storage
  • Poor Quality Adhesives
  • Improper Sizing
  • Lack of Regular Cleaning
  • Neglecting Repairs

Some Tips and Suggestions

  • Regularly Clean and Condition: Wipe down your boots after each use and apply a suitable conditioner to keep the material supple.
  • Proper Storage: Store your boots in a cool, dry place, avoiding exposure to direct sunlight or extreme temperatures.
  • Rotate Your Footwear: If you’re a frequent Hunter boot wearer, consider rotating between multiple pairs to reduce wear on a single set.
  • Invest in Quality Products: When purchasing boots or repair materials, opt for high-quality, reputable brands to ensure longevity.
  • Size Matters: Ensure your boots are the right size to prevent unnecessary stress on the material.

Read More: How to Shine Hunter Boots From Outside or After Rain

Editor Choice

Lightweight Hiking Insulated Non-Slip Outdoor Boots

  •  Boots are made from waterproof mesh upper
  • 200 Grams Thinsulate Insulation for -13°F
  • Super aggressive X-grip rubber outsole with 7mm
  • Molded TPU ankle support


Fixing cracked Hunter boots is a manageable task with the right materials and a bit of patience. By understanding the common causes of cracks and implementing proper care and maintenance, you can extend the life of your boots and continue striding confidently through all types of terrain.

Related FAQs

While regular glue might provide a temporary fix, it’s advisable to use a specialized waterproof adhesive designed for footwear repairs to ensure a lasting solution.

If your boots hold sentimental value or are in good overall condition aside from the cracks, repairing them can be a cost-effective and eco-friendly choice.

Cleaning and conditioning after each use is ideal, but at a minimum, aim for a thorough cleaning every few weeks, especially during heavy use periods.

While Hunter boots are designed for various weather conditions, extreme temperatures can impact their longevity. Avoid prolonged exposure to extreme cold or heat.

Leave a Comment